3D Printing Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
~~NOTOC~~
|<100% 25% - >|
^  \\ 3D PRINTING AND DESIGN REFERENCE DOCUMENT\\ \\   ^^
^  Document Title:|Document Title|
^  Document No.:|1715849880|
^  Author(s):|jattie|
^  Contributor(s):|  |



**REVISION HISTORY**
|< 100% 10% - - 17% 10% >|
^  \\  Revision\\  \\  ^\\ Details of Modification(s)^\\ Reason for modification^  \\ Date  ^  \\ By  ^
|  [[:doku.php?id=tuning:dimensional_accuracy&do=revisions|0]]  |Draft release|Document description here|  2024/05/16 08:58  |  jattie  |


----

====== 07 - XY and Hole Compensation ======

This section makes use of the model [[https://www.printables.com/model/775001-xy-hole-compensation-calculator-for-orca-slicer-et|XY & Hole Compensation Calculator]] by [[https://www.printables.com/@walloper3|@walloper3]]

Download the model, slice, print and measure and use the calculator to calculate the compensation parameters.

<WRAP center round download 60%>
[[https://www.printables.com/model/775001-xy-hole-compensation-calculator-for-orca-slicer-et/files]]
</WRAP>


{{https://media.printables.com/media/prints/775001/images/6022987_f74099d0-a1a2-4a56-9c6c-9d92af16c4ff_475a4505-2bd4-4f75-9ca8-29c9d70f9206/thumbs/inside/1280x960/png/picture1.webp}}

Once printed enter the measured dimensions into the calculation fields below:

{{url>http://3dfaq.net/dimcalc.html 400,240}}

{{:02_printer_tuning:screenshot_2024-05-28_205230.png?nolink&400|}}In Orca/Bambu Studio and Similar platforms fill in the calculated values under XY hole compensation and XY contour compensation. 

<WRAP center round tip 60%>
Please consider thanking the author of the model by uploading your print result to the printable page.
</WRAP>